smart upgrade is not working anymore

[Tarek El-Sherbiny]

Hi Mark,

Thanks you very much for the info. You are right. I have deleted the
rpm-sys channel by mistake.
I've added the channel again and now it's all working fine.

Thanks again.

Tarek


On Tue, Aug 26, 2014 at 2:41 PM, Mark Hatle <mark.hatle at windriver.com>
wrote:

> On 8/26/14, 8:19 AM, Tarek El-Sherbiny wrote:
>
>> Hi All,
>>
>> I ended up in a situation where my smart upgrade command is not doing
>> anything.
>> However smart update is detecting the more recent packages on the repo
>>
>
> This looks like you are using OpenEmbedded or the Yocto Project.  You
> might get more response asking there lists.
>
> However, the first thing you need to do is check that you have the rpm-sys
> loaded, as well as the remote feed.  List your available sources, if
> rpm-sys is missing that is your problem.  It's only able to check the
> remote feed and not the local system.
>
> The other thing to check is that your /etc/rpm/platform file is setup
> properly.  This file is used by RPM5 to explain compatibility with
> packages.  If it's not configured properly you can get into a situation
> where the smart side tries an upgrade and the RPM side determines it's not
> compatible.
>
> --Mark
>
>
>  $Updating cache...
>>   ####################################################################################
>> [100%]
>>
>> Channels have 3 new packages:
>>      example-0.1-r4.0 at cortexa9hf_vfp_neon
>>      example-dbg-0.1-r4.0 at cortexa9hf_vfp_neon
>>      example-dev-0.1-r4.0 at cortexa9hf_vfp_neon
>>
>> Saving cache...
>>
>> $smart upgrade
>> Loading cache...
>> Updating cache...
>>   ####################################################################################
>> [100%]
>>
>> Computing transaction...
>> No interesting upgrades available.
>>
>> when I tried to force the installation of the package manually I've got
>> the
>> following error:
>>
>> $smart install example
>> Loading cache...
>> Updating cache...
>>   ####################################################################################
>> [100%]
>>
>> Computing transaction...
>>
>> Installing packages (6):
>>    bash-4.2-r6 at cortexa9hf_vfp_neon
>>   libtinfo5-5.9-r15.1 at cortexa9hf_vfp_neon
>>    example-0.1-r4.0 at cortexa9hf_vfp_neon
>> ncurses-terminfo-base-5.9-r15.1 at cortexa9hf_vfp_neon
>>    libc6-2.18-r0 at cortexa9hf_vfp_neon
>>   update-alternatives-cworth-1:0.1.8+svnr653-r13.0 at cortexa9hf_vfp_neon
>>
>> 1.9MB of package files are needed. 3.7MB will be used.
>>
>> Confirm changes? (Y/n): Y
>>
>> Fetching packages...
>> ->
>> http://192.168.113.70/utilite/rpm/cortexa9hf_vfp_neon/
>> example-0.1-r4.0.cortexa9hf_vfp_neon.rpm
>>
>> example-0.1-r4.0.cortexa9hf_vfp_neon.rpm
>> ############################################################
>> ########################
>> [100%]
>>
>> Committing transaction...
>> Preparing...
>> ############################################################
>> ########################
>> [  0%]
>> error: package libc6-2.18-r0.cortexa9hf_vfp_neon is already installed
>> error: package ncurses-terminfo-base-5.9-r15.1.cortexa9hf_vfp_neon is
>> already
>> installed
>> error: package bash-4.2-r6.cortexa9hf_vfp_neon is already installed
>> error: package libtinfo5-5.9-r15.1.cortexa9hf_vfp_neon is already
>> installed
>>
>>
>> How do I fix the upgrade command ?
>>
>> Thanks
>>
>> --
>> /Tarek/
>>
>
>


-- 
*Tarek*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.labix.org/pipermail/smart-labix.org/attachments/20140827/cdf1f123/attachment.htm>